Pneumatic Drain Cleaner

The pneumatic drain cleaner is used to clear blockages or clogs in drains and pipes by utilising compressed air. The pneumatic drain cleaner is designed to deliver a burst of high-pressure water into the pipe, dislodging or breaking up obstructions and allowing water to flow freely.

Key features and components of the pneumatic drain cleaner include:

Air Compressor: The primary component is an air compressor that generates compressed air at high pressure. The air compressor provides the force of water needed to dislodge blockages within the plumbing system.

Nozzles: The cleaner comes with x4 flexible nozzles that can be attached to the end. These nozzles are designed to direct the high-pressure in specific ways, optimising the effectiveness of the cleaning process.

Steps for using the pneumatic drain cleaner:

Prepare the Equipment: Pump the pneumatic drain cleaner around 5 times to a suitable air pressure. 

Insert the correct Nozzle: Place the appropriate nozzle at the end of the cleaner and make sure that the area is filled with a suitable amount of water. Place the cleaner nozzle into or over the drain or pipe that needs cleaning. 

Apply Pressure: Activate the air compressor my pulling the trigger to release a burst of high-pressure air. The force of the air will push the water around to remove any dislodges or clogs, allowing water to flow through.

Repeat if Necessary: In some cases, it may be necessary to repeat the process to fully clear the blockage.

Inspect the Drain: After using the pneumatic drain cleaner, it's advisable to inspect the drain to ensure that the blockage has been successfully cleared.

Video